Spring is here, and it is the season of active and flooding rats. Although small mice are inconspicuous, they will bring major safety hazards to the safe production and safe operation of electric power enterprises. Once the rat enters the power station, substation, power distribution room, transformer room and other live areas to bite the wires and damage the live equipment, it will cause a short circuit of the equipment and cause property loss of the enterprise. In severe cases, it will cause a fire and affect the normal operation of the power system. It will cause personnel safety problems. Therefore, electric power companies must choose a really easy-to-use mouse guard. Jinneng Power’s newly developed polyurethane sandwich mouse baffle has become an ideal choice for biological protection in key areas of the enterprise.
Jinneng Power’s polyurethane sandwich mouse baffle is based on the thickened aluminum alloy mouse baffle of Jinneng Power’s original products, and a new material style is added according to the actual needs of customers to meet customers More demand scenarios. Compared with the thicker aluminum alloy mouse baffle, this mouse baffle is filled with polyurethane sandwich, which is a composite mouse baffle. Its outer shell is made of 0.3mm thick color steel plate, which is harder and stronger, and the surface is also treated with anti-corrosion, which is not easy to be corroded or rusted; the polyurethane interlayer of the inner core can resist heat and flame, and its high temperature resistance is better than other The material mouse baffle is higher, which can also delay the spread of fire in the event of a fire. It is more suitable for use in complex environments and key electrified areas to prevent accidents and hidden dangers caused by harmful organisms such as mice.
Jinneng Power’s polyurethane sandwich mouse guard continues the classic special card slot fixing design of Jinneng Power. The mouse baffle with a special card slot fixed design is composed of a card slot and a panel, which is easier and faster to remove, install and carry than the traditional mouse baffle. When in use, the installer only needs to fix the two card slots to both sides of the door frame with expansion screws, and then insert the panel along the card slots from above. It is also very convenient, and at the same time, it can prevent the mouse board from shaking back and forth and making abnormal noises. In addition, the upper and lower ends of the panel of the polyurethane sandwich mouse baffle are also pasted with reflective strips, which are very easy to identify at night and prevent staff from tripping over the mouse baffle when they go in and out at night.
Generally speaking, the relevant national regulations stipulate that the height of the mouse baffle shall not be lower than 50cm. Customized services can also be provided according to business needs. Not only can mouse guards of different specifications and heights be customized for enterprises, but also the original single-sided design of mouse guards can be upgraded to a more beautiful double-sided style.
In addition to the polyurethane sandwich mouse baffle that is more suitable for electric power companies, new energy companies, chemical companies and other companies with special needs, Jinneng Power also has a variety of mouse baffles, such as suitable for factories, warehouses, school cafeterias and other environments use. Jinneng Electric’s mouse guard is strong and beautiful, light and easy to install, and it also plays a very good role in protecting against rodent damage. You don’t have to worry about mice and other small animals entering the room and causing damage!
City Polyurethane Materials Co., Ltd.
ZF-10: high-efficiency low-odor foaming catalyst, typically used in the preparation of low-odor polyurethane foam products
ZR-50: Low-odor gel catalyst, providing excellent balance, can be used for polyurethane molded high-resilience foam
Z-131: Reactive low-odor gel Gelamine Catalyst Compound
Z-130: Low Odor Gel Catalyst, Balanced Gel/Foaming
ZR-70: Low odor catalyst for packaging foam and molding foam on vinyl skin with good foam and gel balance
ZR-40 (Wujia dipropylenediamine): especially effective for cold molded high resilience foam, low odor gel and good balance of foaming catalyst
LE-310: Low-odor reactive gel catalyst for large sponges, a new type of low-VOC amine gel catalyst, with an amine content of more than 95%
LE-530: Reactive gel Catalyst, used in various polyurethane foam products
DPA: low odor gel catalyst, outstanding balance and versatility to provide good fluidity
TAP 1-Methyl-4-(2-Dimethylaminoethyl)piperazine: Excellent Trimerization Catalyst for Improved Flow
DMDEE (2,2′-dimorpholine diethyl ether): a strong foaming catalyst, providing a stable prepolymer system
DMAEE: low density full water Rigid and low-density semi-rigid foams
BDMAEE bis-(2-dimethylaminoethyl) ether: a highly effective blowing catalyst
BDMA (N,N-Dimethylbenzylamine): polyurethane rigid foam catalyst, epoxy accelerator
DMEA (N,N’-di Methylethanolamine): neutralizes acids in some rigid foam systems,
PMDETA (pentamethyldiethylenetriamine): rigid for HCFC/water foams Foam is especially effective, similar to PC5
