Leather wear repair artifact/healing cream (spray) Healing cream (spray): This product is a water-based repairing cream that can be sprayed, brushed, and scraped; it is specially designed for leather wear and tear. It has a perfect repair effect on leather fuzz, wear, scratches, cracks, cracks, etc. This product can be used alone or in any ratio with pigment paste or color paste, and can be applied by brushing or spraying. If the leather is worn or cracked, apply this product directly with a sponge and let it dry naturally before coloring normally. If you need a better smooth feel, use an iron after drying. After ironing and smoothing, the normal coloring effect will be better. If you need to add color, after adjusting the color, add this product (spray wound healing ointment) and mix 1.5 parts of color paste: spray 8.5 parts of wound healing ointment, brush it with a sponge or brush, let it dry naturally, and iron it for a smoother effect after drying. good. This product has strong bonding, soft film formation and is not sticky. Matte and easy to color.
Ordinary leather clothing coloring process:
1. Scrubbing:
Wash with facial cleanser
2. Closed:
Sealer 1: 1 part water
Spraying with a spray gun
3. Coloring formula:
1 part of high-fine pigment paste
Multifunctional softener 0.3-0.5 parts
Special film-forming agent 2 parts
An appropriate amount of water (optional)
Note: If you need better firmness, add 4-5 drops of cross-linking agent
4. Recipe for repairing worn leather clothing:
1 portion of healing ointment (spray)
An appropriate amount of prepared color paste
Note: Stir evenly and filter through the filter. If there is wear and tear, take a portion of the repairing cream (spray) and add a little prepared color paste. If necessary, add a little fiber softener. After stirring evenly, use a high-fineness sponge to dip it in and brush it. It must be even and consistent. , colorless flower. If it is aniline leather, you can spray it with a spray gun. After it is dry, iron it with an iron pad and a leather ironing cloth. The iron temperature should be controlled at 80 degrees. After drying, spray the original prepared color paste, and after drying, spray the corresponding brightener.
